Home > Memory Error > Uncorrectable Memory Error Detected On Processor 1 Dimm

Uncorrectable Memory Error Detected On Processor 1 Dimm

Contents

Solved uncorrectable memory error in ILM-log Posted on 2010-03-08 Server Hardware Windows Server 2008 1 Verified Solution 3 Comments 3,849 Views Last Modified: 2012-08-13 Hi experts I get the following log-entry Note - To recover fault information view the SP SEL. If neither option was selected, the system can be reset using the Remote Management feature in the Dell Remote Assistant. Affected configurations The system may be any of the following IBM servers: System x3530 M4, type 7160 E5-xxxxV2, any model System x3630 M4, type 7158 E5-xxxxV2, any model This tip is http://centralpedia.com/memory-error/uncorrectable-memory-error-detected-on-processor-1-dimm-6.html

Drive ready for insertion or removal All three drive status indicators are off. NOTE: If you do not have a RAID controller installed, you will see only the "drive online" and "drive bay empty" indicator patterns. If the problem persists, replace the system board. 4-4-1 Super I/O chip failure (defective system board) Replace the system board. 4-4-2 Parallel-port test failure (defective system board) Replace the system board. Remove the DIMMs from the DIMM slots. this content

Uncorrectable Memory Error ((processor 1 Memory Module 3))

Unsupported DIMM(s) installed in the onboard RAID DIMM socket Install only unbuffered 64-MB SDRAM DIMM in the RAID DIMM socket. the chipset on the mobo. Dell HIP Application Alert Log Messages Message Cause Corrective Action Automatic management notification has occurred The server stopped functioning and called the notification number specified in the DC Console Actions tab.

  1. Remove one or more DIMMs so that total memory is 2 MB or less.
  2. No i upgraded the SPP then installed the new processor after a few days the error came, i switched back to the old processor still same error, then i bought new
  3. Did the error happen with the old memory?
  4. Drive bay empty All three drive status indicators are off.
  5. If more than one DIMM has experienced multiple CEs, other possible causes of CEs have to be ruled out by a qualified Sun Support specialist before replacing any DIMMs.

After the crash I tried to reboot the server and I got the memory error and the server hung (right at the beginning). Back to top #12 Morotalizer Morotalizer HSS Member Members 10 posts Posted 29 August 2014 - 07:19 AM Ok, i have a Case with HP now regarding this, and so far Back to top #16 Morotalizer Morotalizer HSS Member Members 10 posts Posted 02 September 2014 - 11:23 PM The new MB is now in place and the server has been running Uncorrectable Memory Error (module Unknown) If the problem persists, replace one or more DIMMs.

See the x64 Servers Utilities Reference Manual for details. Corrected Memory Error Threshold Exceeded For example, before you format a diskette, a message may warn you that you may lose all data on the diskette, as a way to protect against inadvertently erasing or writing By default, the Memory Channel Mode is configured to Independent Channel Mode (Non-Lockstep). © Copyright 2016 Hewlett-Packard Development Company, L.P. https://community.spiceworks.com/topic/563603-uncorrectable-memory-error A Machine Check error-message bubble appears on the task bar.

Several functions may not work. Correctable Memory Error Rate Exceeded For Dimm Most of the ProLiant servers are capable of detecting and correcting single-bit errors. Unsupported memory in DIMM slot(s) n. The drive failure indicator blinks off briefly each second.

Corrected Memory Error Threshold Exceeded

If the problem persists, replace the DIMMs. The DIMM slots are paired and the DIMMs must be installed in pairs (0-1, 2-3, 4-5, and 6-7). Uncorrectable Memory Error ((processor 1 Memory Module 3)) See "Microprocessors" for instructions. Uncorrectable Memory Error Dell If the problem persists, replace the DIMMs.

No boot device available Faulty diskette, diskette/tape drive subsystem, hard-disk drive, hard-disk drive subsystem, or no boot disk in drive A If booting from a diskette, ensure the diskette is bootable. http://centralpedia.com/memory-error/uncorrectable-memory-error-detected-on-processor.html If the problem persists, replace the mouse. A soft error occurs when the data and/or ECC bits on the DIMM are incorrect, but the error will not continue to occur once the data and/or ECC bits on the If the problem still persists, replace the system board. 4-3-3 Defective system board Replace the system board. 4-3-4 Time-of-day clock stopped Replace the battery. Uncorrectable Memory Error (system Memory, Memory Module 0)

Although hard correctable memory errors are corrected by the system and will not result in system downtime or data corruption, but still they indicate a problem with the hardware. If the problem persists, replace the DIMMs. If the problem persists, replace the system board. http://centralpedia.com/memory-error/uncorrectable-memory-error-detected-on-processor-1-dimm-3.html Back to top #5 schoondoggy schoondoggy HSS Genius Moderators 5,321 posts Posted 28 August 2014 - 02:52 PM Is the server running ok or is it crashing.

BIOS DIMM Error Messages The BIOS displays and logs the following DIMM error messages: NODE-n Memory Configuration Mismatch The following conditions will cause this error message: The DIMMs mode is not These warning messages usually interrupt the procedure and require you to respond by typing y (yes) or n (no).

NOTE: Warning messages are generated by either the application program or the DIMM Fault LEDs When you press the Press to See Fault button on the motherboard or the mezzanine board, LEDs next to the DIMMs flash to indicate that the system has

Was the information on this page helpful?

When a UCE occurs, the memory controller causes an immediate reboot of the system. 2. What would you say? 0 Question by:Arikael Facebook Twitter LinkedIn Google LVL 11 Best Solution bySemperWiFi Easiest way to check is to test the memory (MEMTEST86 - FREE - http://www.memtest86.com/). c to 1e BIOS retrieved and reported some hardware evidence, including all processors' Machine Check Error registers (events 14 to 18). 1f After BIOS detected that a UCE had occurred, it Thank you!

If possible, the chassis number and probe number are provided. Install an operating system on the hard-disk drive. Keyboard controller failure Defective keyboard/mouse controller (defective system board) Replace the system board. http://centralpedia.com/memory-error/uncorrectable-memory-error-detected-on-processor-1-dimm-9.html Sector not found Defective sectors on diskette or hard-disk drive Replace the diskette or hard-disk drive.

Back to top #8 ikon ikon HSS Elite Genius Donating Member 16,090 posts Posted 28 August 2014 - 04:59 PM Can you put some extra cooling on the server for a Fan sensor detected a failure* A failure of one or more fans was detected by the thermal-monitoring facility in the specified server. Auxiliary device failure Mouse cable connector loose or improperly connected, defective mouse Check the mouse cable connection. Decreasing available memory One or more DIMMs improperly seated or faulty Remove and reseat the DIMMs.

Warning Messages A warning message alerts you to a possible problem and asks you to take corrective action before the system continues a task. If the problem persists, replace the system board. The user is warned about a DIMM exceeding the correctable error threshold in multiple ways. The Integrated Management Log reports Unrecoverable System Error (NMI) has occurred.

Note - If more than one DIMM has experienced multiple CEs, other possible causes of CEs must be ruled out by a qualified Sun Support specialist before replacing any DIMMs. Footer links Contact Privacy Terms of use Accessibility A flashing LED identifies a component with a fault. Soft error will not typically cause a DIMM to exceed HP’s correctable error threshold and is not notified about soft errors which do not indicate any issue with the hardware.